Monthly Archives: July 2017

How It Works: Water Baseboard Heaters

Baseboard hot water heating systems, as their name implies, are typically installed at the baseboard or, at the very least, a point low to the ground. Since heat naturally rises, placing the heating element at the lowest point in a room is an easy way to evenly heat the air in a space.

One unique benefit of using a water based heating system that relies on no form of forced ventilation is that the amount of dust that travels through the air in your home will be lower than in a home where a central air conditioner is blowing air through all the vents.

If the idea of using water to heat the air in a room still seems odd to you, the following information given by Chelmsford plumbing and heating should clue you in on how hydronic baseboard heaters work and how to deal with any problems that could arise.


The hot water in the system is obtained from a boiler in a utility room, and this boiler is heated by gas, oil, or electricity. The hot water is pumped through a system of pipes that are installed in the baseboard. The heat from this hot water is transferred to the room, and once the heat transfer has cooled the water down again, it’s piped back to the boiler room, replaced by a fresh influx of hot water, and reheated.

The hot water pipes on these baseboard heaters are typically made of copper and are uniquely fin-shaped to ensure faster dissipation of heat from the surface of the pipe. According to plumbers Essex, this radiator type structure is similar to the construction of radiators you would find in automobiles.


The quantity of water in a baseboard hot water heating system needs to be kept at a constant volume, and any loss of water has to be compensated from an overhead tank that contains the water storage. The function of the boiler is connected to the thermostats in the room or rooms being heated and when the temperature reading on these thermostats are increased a signal is sent which heats up the boiler and activates the pump to send water to the area demanding the heat needed.

It’s undoubtedly less expensive to plug in either of these single units to heat a small space rather than an entire home, the specific energy savings, heating times, and effectiveness will depend on factors unique to your home. These include the prices for electrical utility use in your area and even how well you’ve sealed leaks, drafts, and other issues in your home that let heat escape. If you want to know more about your water baseboard heaters and how you can use them efficiently in your home, do not hesitate to call plumbers Maidstone to help you out!


Signs Your Boiler Needs To Be Replaced

You don’t need to wait until a boiler completely breaks down before replacing the unit. Which can cause hassle like the need for heat on a very cold day. Since the failure is unexpected there are no funds allocated to fix the problem. Now suddenly you have to shell out enormous capital to replace the boiler. Now the first tip in avoiding this problem is to implement a regular check up with a qualified contractor like Chelmsford Plumbing And Heating to handle your maintenance needs. These inspections of the boiler system should occur at least once a year. In order to ensure the owners maintain their full-warranty, be sure to call Chelmsford Plumbing And Heating to ensure the safety of your boiler system.

If you missed your annual inspections here are signs that your boiler needs to be replaced:

Leaks: A boiler that leaks or requires additional make-up water could be nearing the end of its lifecycle. By replacing the existing unit, the building manager or owner can avoid costly floods and critical boiler or property damage. Expert Chelmsford Plumbing And Heating can help you replace your worn out boiler.

Energy Costs: Be mindful of any increases in energy expenses. If energy bills are slowly rising it may be due not only to the age of the boiler but also due to increasing costs of the boiler maintenance. If a boiler requires constant servicing, the system has likely become less efficient. One should consider upgrading to a more reliable, durable unit such as a cast iron unit. Additionally, a noisy unit also may be a sign that it’s time for an upgrade.

Age: Condensing boilers haven’t been on the market for a long time and therefore it is hard to predict their longevity. With proper maintenance, they are expected to last at least 15 years or longer. Essex Plumbing And Heating boilers come with a 10 year non-prorated heat exchanger warranty for commercial boilers, 12 year non-prorated heat exchanger warranty for residential boilers and two year parts warranty for both categories. Cast iron boilers, on the other hand, should be considered for replacement if they have been operating for more than 20 or 30 years. Some of these boilers can last even up to 50 years or longer, but even with decent annual maintenance, their efficiencies are much lower than today’s cast iron boilers. Often times, the energy savings from a new boiler replacement alone practically pays for the cost itself within a year or two.

Comfort: If you notice that some rooms in a building are too hot or too cold or have varying temperatures throughout the day, it’s possible that the unit and its controls are no longer effective or the facility may benefit from more efficient controls.

Increased frequency of failures: This is a clear indicator that the unit is due for either a major overhaul or replacement. Frequent failures of your boiler can give you a conclusion to finally replace it since it cannot do its job anymore efficiently. Chelmsford heating experts can help you with the replacement or overhauling of your boiler which is not performing well anymore.

You can always call your local plumber and heating services to get expert advice on your boiler. You will know whether you can save what you have or get a new one.